Recycled Roll Construction Floor Surface Protection Paper 1mm Multi Purpose

Ecological Recycled Paper Roll, Multi-Purpose Construction Floor Surface Protection Paper

During decoration, in order to avoid damaging the finished floor tiles during construction, it is best to wait until the newly installed floor tiles are completely dry before other construction projects. It is necessary to take proper maintenance measures for the finished floor tiles.

1, Anti collision and wear

2, Moisture and dirt proof.

Product performance:

• Environmental protection: it is produced with environmental protection technology and materials, has no peculiar smell, can be used for many times, and can be recycled as waste paper.
• Waterproof: breathe water, absorb but not rotten and impermeable, and evaporate naturally, so as to ensure that the leakage of water, paint and other liquids will not affect the protected floor during a long period of decoration.
• Skid resistance: the bottom surface of the paper adopts chequer anti-skid design, which greatly increases the construction safety factor.
• Pressure resistance: the paper fiber is slender, flexible and strong, and the thickness of the finished product is high. It can effectively resist pressure and impact during decoration, not easy to damage and decay, folding and wear-resistant, and protect the floor for a long time.
• Convenience: light material, drum packaging, convenient for handling, spreading and recycling, and the paper surface is flat for cleaning.

In all commercial buildings and construction projects, budgets are tight, deadlines are set, and quality must meet the highest standards. Damaged furniture and surfaces may be commonplace due to the continuous cross paths of multiple transactions and the continuous large amount of on-site traffic.

This product is applicable to the protection of floor furniture during home decoration, hotel decoration and construction site decoration. It has good wear resistance, waterproof and anti-skid performance, and can buffer the falling of construction tools against floor furniture. It can effectively protect ceramic tile floor, wooden floor furniture, etc. This product belongs to environmental protection paper, which is produced with wood pulp and straw pulp as raw materials. It is 100% recyclable, biodegradable and recyclable.

How to install?
1, Calculate the square footage of the area you will be protecting to determine what size roll, and how many rolls you will need.
2, Clear and sweep the floor and area that will need protecting.
3, Starting at one end, roll out the paper roll to your desired length, and cut with a box cutter (we recommend using the printed side up.)
4, Overlap the seam by roughly a half an inch, and repeat until your surface is completely covered.
5, Tape together the seams, but make sure the seam tape does not stick to the floor.
6, Use a less adhesive, floor-friendly tape such as a white breathable's tape on the edges to secure firmly to the surface. ( ** We suggest doing an area test before using any tape on the floor to ensure no floor or finish is harmed.)
7, Once done, roll up and and reuse if there is minimal wear and tear on the surface protector.

JOBSITE CALCULATOR

Calculation is based off of 38in × 100ft roll of BTO Flooring Protection Paper and 164ft BTO Breath Tape. Rounded up to nearest whole roll.

Temporarily Protective Cardboard Coverage of 300 sqft

Our Advantage